Installing a Brick Paver Walkway or Bricks Stones

Making use of Installing a Brick Paver Walkway or Decorative Brick Blocks or Pavers to produce a sidewalk or outdoor patio complements a home in a way that is unrivaled. It includes a level of quality and elegance to a home entryway that can not be attained with either concrete or asphalt. Brick and Pavers likewise are available in several colors and shapes permitting distinct color design and patterns to be achieved. In addition, installing a Brick or Paver pathway does not necessarily need a pro. With some standard understanding and a relatively simple pathway plan, a house owner is capable of carrying out such a task.

The secret to setting up a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be installed. In addition, string lines must be strung on each side of the pathway.
As soon as the location has been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. Then 2" of sand, or stone dust must be topped the gravel. Once again the sand/stone dust ought to be tamped down. Stone dust is chosen. The height in between the tamped down sand and the stringline must equal the density of the brick or paver.

Now that you have a stable base, place a 1" pipeline or ledger board the length of the pathway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. more info In doing this you will develop a level surface area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will serve as your sidewalk border and help to keep the stability and shape of the sidewalk. You can get these plastic strip borders at many house improvement shops. The strips should be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the stability of the sidewalk.

Undoubtedly bricks/pavers will need to be cut or split when developing the pathway. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, construct up the outside edges with extra sand, and then shovel in the topsoil and pack down securely.
Spread stone dust over the new pathway and sweep into the cracks. This will finish the interlocking of the bricks and help to get rid of any weed growth.


In addition, setting up a Brick or Paver sidewalk does not always need a pro. The secret to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the pathway. These strips will act as your sidewalk border and help to keep the integrity and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or split when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *