Installing a Brick Paver Walkway or Brick Block Concrete

The use of Setting up a Brick Paver Walkway or Big Bricks or Pavers to develop a pathway or outdoor patio complements a house in a manner in which is unmatched. It adds a level of quality and sophistication to a house entrance that can not be attained with either concrete or asphalt. Brick and Pavers also can be found in lots of various colors and shapes allowing for unique color schemes and patterns to be accomplished. In addition, installing a Brick or Paver pathway does not always require a pro. With some basic understanding and a reasonably basic pathway plan, a homeowner can carrying out such a task.

The secret to installing a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be set up. The area ought to be removed at least a foot down, getting rid of all topsoil and clay soil. In addition, string lines must be strung on each side of the pathway. The string lines show the finished height of the pathway.
Once the area has actually been dug down, 3/4" gravel stone must be laid in and tamped down securely. Then 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust must be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline ought to equate to the thickness of the brick or paver.

Now that you have a stable base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now more info put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your sidewalk border and help to maintain the integrity and shape of the walkway. You can get these plastic strip borders at most house enhancement shops. The strips need to be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help keep the stability of the walkway.

Undoubtedly bricks/pavers will need to be cut or divided when building the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the brand-new pathway and sweep into the cracks. This will finish the interlocking of the bricks and help to get rid of any weed development.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or journal board the length of the here walkway on either side of the walkway. These strips will act as your pathway border and aid to maintain the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or divided when constructing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *